manualshive.com logo in svg

Dell PowerConnect 35 SERIES, User Manual

Get the most out of your Dell PowerConnect 35 SERIES with our comprehensive User Manual. It's available for free download on manualshive.com, ensuring you have all the information you need to optimize your networking experience. Explore advanced features, troubleshoot effectively, and unlock the full potential of your device with our user-friendly manual.

Share
Download
background image

Contents

3

Contents

1

Introduction

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  

11

System Description

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

11

PowerConnect 3524

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

11

PowerConnect 3524P

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

11

PowerConnect 3548

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

12

PowerConnect 3548P

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

12

Stacking Overview

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

12

Understanding the Stack Topology

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

13

Stacking Failover Topology

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

13

Stacking Members and Unit ID

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

13

Removing and Replacing Stacking Members

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

14

Exchanging Stacking Members

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

15

Switching from the Stack Master to the Backup Stack Master

.   .   .   .   .   .    

17

Features Overview

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

17

IP Version 6 (IPv6) Support

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

17

Power over Ethernet

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

17

Head of Line Blocking Prevention

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

18

Flow Control Support (IEEE 802.3X)

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

18

Back Pressure Support

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

18

Virtual Cable Testing (VCT)

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

18

MDI/MDIX Support

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

18

Auto Negotiation

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

18

MAC Address Supported Features

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

19

Layer 2 Features

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

20

VLAN Supported Features

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

21

Spanning Tree Protocol Features

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

21

Link Aggregation

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

22

Quality of Service Features

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

23

Device Management Features

  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

23

Security Features

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

25

Additional CLI Documentation

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    

26

Summary of Contents for PowerConnect 35 SERIES



























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PowerConnect 35 SERIES

GE SE-100E Instructions Manual preview
SE-100E
Brand: GE Pages: 20
Hama S2100 Operating Instruction preview
S2100
Brand: Hama Pages: 18
StarTech.com VS123HD User Manual preview
VS123HD
Brand: StarTech.com Pages: 10
Cabletron Systems SmartSwitch 2500 Reference Manual preview
SmartSwitch 2500
Brand: Cabletron Systems Pages: 402
Gefen EXT-DP-EDIDP User Manual preview
EXT-DP-EDIDP
Brand: Gefen Pages: 56
IPGARD SA-DVN-8D Quick Start Manual preview
SA-DVN-8D
Brand: IPGARD Pages: 2
Trust START-LINE AGC-3500 Important Information Manual preview
START-LINE AGC-3500
Brand: Trust Pages: 16
XTBA Smart Switch 2:1 Manual preview
Smart Switch 2:1
Brand: XTBA Pages: 3
Lindy 38032 User Manual preview
38032
Brand: Lindy Pages: 4
TESmart HDK0402A1U User Manual preview
HDK0402A1U
Brand: TESmart Pages: 12
Jerguson SAS-16 Installation, Operation & Maintenance Instructions preview
SAS-16
Brand: Jerguson Pages: 4
KYLAND Technology SICOM3028GP Series Hardware Installation Manual preview
SICOM3028GP Series
Brand: KYLAND Technology Pages: 40
Versitron SG70660M Installation Manual preview
SG70660M
Brand: Versitron Pages: 46
Mach Power WL-CPE2G24D-075 User Manual preview
WL-CPE2G24D-075
Brand: Mach Power Pages: 44
Primewire 302523/20191008SZ114 User Manual preview
302523/20191008SZ114
Brand: Primewire Pages: 12
Net Optics Director xStream Pro Quick Install Manual preview
Director xStream Pro
Brand: Net Optics Pages: 2
CYP OR-32USBC-4K22 Operation Manual preview
OR-32USBC-4K22
Brand: CYP Pages: 64
UNICOM MicroGST/5 GEP-32005T User Manual preview
MicroGST/5 GEP-32005T
Brand: UNICOM Pages: 12

Brands by name

Popular brands

Load more brands