Dell PowerConnect 35 SERIES User Manual Download Page 174

Page: 174 / 474

174

Configuring System Information

Define the

Access Profile Name

field.

Define the relevant

fields.

Click

Apply Changes

The new Access Profile is added, and the device is updated.

Adding Rules to Access Profile

The first rule must be defined to beginning matching traffic to access profiles.

Open the

Access Profile

page

Click

Add Rule to Profile

The

Add an Access Profile Rule

page opens.

Figure 6-57.

Add an Access Profile Rule

Complete the fields.

Click

Apply Changes

The rule is added to the access profile, and the device is updated.

Summary of Contents for PowerConnect 35 SERIES



























































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 35 SERIES

Reviews:

Related manuals for PowerConnect 35 SERIES

Brands by name

Popular brands

Dell PowerConnect 35 SERIES, User Manual

Search results

Summary of Contents for PowerConnect 35 SERIES

Reviews:

Related manuals for PowerConnect 35 SERIES

Brands by name

Popular brands