Dell PowerConnect 35 SERIES, User Manual

Page: 151 / 474

Configuring System Information
151
3 Select the Remove check box in the desired entry. Alternatively, select the desired value in the Clear
Table field. The possible filed values are:
– Static Only — Clears the the IPv6 Neighbor Table static entries.
– Dynamic Only — Clears the IPv6 Neighbor Table dynamic entries.
– All Dynamic and Static — Clears the IPv6 Neighbor Table static and dynamic address entries.
– None — Does not clear any entries.
4 Click Apply Changes .
The selected neighbors are deleted, and the device is updated.
Defining IPv6 Neighbors Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the IPv6
Neighbors page.
The following is an example of the CLI commands:
Table 6-25. IPv6 Neighbors Parameters CLI Commands
CLI Command Description
ipv6 neighbor ipv6_addr hw_addr { ethernet
interface-number | vlan vlan-id | port-channel
number }
Configures a static entry in the IPv6 neighbor
discovery cache.
show ipv6 neighbors {static | dynamic }[ ipv6-
address ipv6-address ] [ mac-address mac-address ]
[ ethernet interface-number | vlan vlan-id | port-
channel number ]
Displays IPv6 neighbor discovery cache
information.
clear ipv6 neighbors Deletes all entries in the IPv6 neighbor discovery
cache.
Console# show ipv6 neighbors dynamic
Interface IPv6 address HW address State
--------- ------------ ---------- -----
VLAN 1 2031:0:130F::010:B504:DBB4 00:10:B5:04:DB:4B REACH
VLAN 1 2031:0:130F::050:2200:2AA4 00:50:22:00:2A:A4 REACH