Dell PowerConnect 35 SERIES User Manual Download Page 121

Page: 121 / 474

Configuring System Information

121

The following is an example of the CLI commands:

Viewing the Device Login History

The

page contains information for viewing and monitoring device utilization, including

the time the user logged in and the protocol used to log on to the device.

To open the

page, click

System

→

Logs

→

in the tree view.

console#

show logging file

Logging is enabled.

Console Logging: Level info. Console Messages: 0 Dropped.

Buffer Logging: Level info. Buffer Messages: 62 Logged, 62

Displayed, 200 Max.

File Logging: Level debug. File Messages: 11 Logged, 51

Dropped.

SysLog server 12.1.1.2 Logging: warning. Messages: 14

Dropped.

SysLog server 1.1.1.1 Logging: info. Messages: 0 Dropped.

01-Jan-2000 01:12:01 :%COPY-W-TRAP: The copy operation was

completed successfully

01-Jan-2000 01:11:49 :%LINK-I-Up: 1/e11

01-Jan-2000 01:11:46 :%LINK-I-Up: 1/e12

01-Jan-2000 01:11:42 :%LINK-W-Down: 1/e13

01-Jan-2000 01:11:35 :%LINK-I-Up: 1/e14

Summary of Contents for PowerConnect 35 SERIES



























































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 35 SERIES

Reviews:

Related manuals for PowerConnect 35 SERIES

Brands by name

Popular brands

Dell PowerConnect 35 SERIES, User Manual

Search results

Summary of Contents for PowerConnect 35 SERIES

Reviews:

Related manuals for PowerConnect 35 SERIES

Brands by name

Popular brands