Dell PowerConnect 35 SERIES User Manual Download Page 148

Page: 148 / 474

148

Configuring System Information

Defining IPv6 Neighbors

The

IPv6 Neighbors

Page contains information for defining IPv6 Neighbors which is similar to the

functionality of the

IPv4 Address Resolution Protocol (ARP)

. IPv6 Neighbors enables detecting Link Local

addresses within the same subnet, and includes a database for maintaining reachability information
about the active neighbors paths.

The device supports a total of up to 256 neighbors obtained either statically or dynamically.

When removing an IPv6 interface, all neighbors learned statically and dynamically are removed.

To open the

IPv6 Neighbors

page, click

System

→

IP Addressing

→

IPv6 Neighbors

in the tree view.

Figure 6-39.

IPv6 Neighbors

•

Interface

— Displays the interface on which IPv6 Interface is defined. Interfaces include Ports, LAGs,

or VLANs.

•

IPv6 Address

— Defines the currently configured neighbor IPv6 address.

•

MAC Address

— Displays the MAC address assigned to the interface.

Summary of Contents for PowerConnect 35 SERIES



























































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 35 SERIES

Reviews:

Related manuals for PowerConnect 35 SERIES

Brands by name

Popular brands

Dell PowerConnect 35 SERIES, User Manual

Search results

Summary of Contents for PowerConnect 35 SERIES

Reviews:

Related manuals for PowerConnect 35 SERIES

Brands by name

Popular brands