Dell Diagnostics: Dell OptiPlex GX1 Small-Form-Factor System User's Guide
file:///C|/infodev/2013/eDoc/OpGX1/UG/diag.htm[2/21/2013 11:47:14 AM]
Tests in the Dell Diagnostics
To troubleshoot components or devices, run the appropriate test (test group or subtest) in the diagnostics on
your diagnostics diskette. The diagnostics exercises the functional components and devices of your
computer system more vigorously and thoroughly than they are exercised during normal operation. The
diagnostics is organized by components into test groups and subtests within each test group. Each subtest is
designed to detect any errors that may interfere with the normal operation of a specific device of the
computer.
NOTE: Some subtests requiring hardware not listed in the
System Configuration
area of the
diagnostics screen appear to run, but they conclude with a status message stating
Component not
present (or disabled)
.
The diagnostic test groups, their subtests, and comments concerning their use are listed in Table 2.
Table 2. Dell Diagnostic Test Groups and Subtests
Test Group
Subtest
Comment
RAM
Quick Memory Test
Comprehensive Memory Test
Secondary Cache Memory Test
Tests the RAM and cache. (Some
computers include expanded or
extended memory; all memory is
tested.)
System Set
CMOS Confidence Test
CMEM Confidence Test
DMA Controller Test
Real-Time Clock Test
System Timers Test
Interrupt Controller Test
Reset Button Test
System Speaker Test
Tests the system board’s support
chips, DMA controller, computer timer,
NVRAM, speaker controller, cache, and
EISA configuration RAM chip, as
appropriate.
Coprocessor Calculation Test
Coprocessor Error Exception Test
Tests the math coprocessor that is
internal to the microprocessor.
PC Card Controller Test
Tests the PC Card controller on the
system board.
Thermal Control Test
Checks the functionality of the thermal-
monitoring and microprocessor speed-
switching device on the system board.
Multiprocessor Test
For systems with multiprocessors,
confirms that the secondary
microprocessor is operational.
USB Register Test
Checks the onboard registers of the
USB interface. This subtest does not
test USB peripherals.
USB Memory Structure Test
Monitors the ability of a USB controller
to process a simple set of memory-