Dell OptiPlex GX1 User Manual Download Page 44

Page: 44 / 174

Dell Diagnostics: Dell OptiPlex GX1 Small-Form-Factor System User's Guide

file:///C|/infodev/2013/eDoc/OpGX1/UG/diag.htm[2/21/2013 11:47:14 AM]

If you want more information about a test group or subtest, move the highlight to the

About

option and press

<Enter>. After reading the information, press the <Esc> key to return to the previous screen.

Main Menu Categories

Eight categories are listed in the

Main

menu of the diagnostics main screen:

Run

Select

Subtest

Options

Test Limits

About

Key-Help

, and

Quit

NOTE: Before running any test groups or subtests (by selecting

Run

), you should consider setting

global parameters within the

Options

category. They offer you greater control over how the test

groups or subtests are run and how their results are reported.

There are two ways to select a menu category:

Look on the screen to see which letter in the category is capitalized, and type that letter (for example,
type

to select the

Run

category).

Move the highlight to the category you wish to select by pressing the left- or right-arrow key, and then
press <Enter>.

Whenever one of the eight categories is selected, additional choices become available.

The following subsections explain the menu categories as listed from left to right in the

Main

menu.

Run

displays five categories:

One

Selected

All

Key-Help

, and

Quit

Menu

. If you select

One

, all the

subtests within the highlighted test group are run. If you choose

Selected

, only the selected test groups or

the subtests that you selected within the test groups are run. If you select

All

, all of the subtests in all of the

test groups are run. (The test groups or subtests are run in the same order as they are listed.)

The

Key-Help

category displays a list of key controls available for the particular category you have chosen.

The

Quit Menu

category returns you to the

Main

menu.

Select

allows you to select individual test groups to tailor the testing process to your particular needs. You

can choose one or more test groups and run them sequentially or individually. When you choose

Select

, five

categories are displayed:

All

One

Clear All

Key-Help

, and

Quit

Menu

To select all the test groups, press <Enter> when

All

is highlighted in the

Select

menu.

To select an individual test group, highlight the test group and press the spacebar or highlight

One

and press

<Enter>. Press the up- or down-arrow key to change the highlighted test group.

To reverse a test group selection, highlight the test group and press the spacebar. To clear all selections,
select

Clear All

The

Key-Help

category displays a list of key controls available for the particular category you have chosen.

The

Quit Menu

category returns you to the

Main

menu.

Summary of Contents for OptiPlex GX1















































































































































































Search results

Summary of Contents for OptiPlex GX1

Reviews:

Related manuals for OptiPlex GX1

Brands by name

Popular brands

Dell OptiPlex GX1, User Manual

Search results

Summary of Contents for OptiPlex GX1

Reviews:

Related manuals for OptiPlex GX1

Brands by name

Popular brands