CHAPTER 4
Hardware FRU procedures
This section explains how to perform the hardware steps in the FRU procedures that
also require steps involving VxFlex OS.
You are referred to the relevant section of the
VxFlex Ready Node Field Replacement
Unit Software Guide
for the software steps for replacing the system component.
l
Important information before performing a FRU procedure
............................... 56
l
...................................................................................58
l
.................................................................................................66
l
Replacing system memory modules
....................................................................74
l
Replacing the hard drive backplane
.................................................................... 81
l
........................................................................................ 91
l
Replacing an expansion card or expansion card riser
..........................................95
l
................................................................................... 112
l
...........................................................................116
l
................................................................................... 119
l
Replacing the processor and heat sink
..............................................................126
l
Replacing the storage controller card
............................................................... 136
l
..............................................................................140
l
........................................................................... 147
l
........................................................................... 150
l
Replacing the power interposer board
.............................................................. 153
l
.................................................................................. 157
Hardware FRU procedures
55