l
1/4 inch flat head screwdriver
l
Wrist grounding strap
You need the following tools to assemble the cables for a DC power supply unit:
l
AMP 90871-1 hand-crimping tool or equivalent
l
Tyco Electronics 58433-3 or equivalent
l
Wire-stripper pliers to remove insulation from size 10 AWG solid or stranded,
insulated copper wire
Note
Use alpha wire part number 3080 or equivalent (65/30 stranding).
Unpack the part
Procedure
1. Wear ESD gloves or attach an ESD wristband to your wrist and the enclosure in
which you are installing the part.
2. Unpack the part and place it on a static-free surface.
3. If the part is a replacement for a faulted part, save the packing material to
return the faulted part.
Hardware FRU procedures
Unpack the part
57
