Dell EMC VxFlex Ready Node R840, Manual

Page: 205 / 218

Table 37 Status LED indicators and descriptions (continued)
Icon Description Condition Corrective action
Note
For more information about the supported PCIe cards, see
Expansion card installation guidelines .
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your
system.
Figure 99 System health and system ID indicators
This table describes the system health and system ID indicators. Item 1 indicates Solid
blue where the condition indicates that the system is turned on, system is healthy, and
system ID mode is not active. Press the system health and system ID button to switch
to system ID mode. Item 2 indicates Blinking blue where the condition indicates that
the system ID mode is active. Press the system health and system ID button to switch
to system health mode. Item 3 indicates solid amber where the condition indicates
that the system is in fail-safe mode. If the problem persists, see the Getting help
section. Item 4 indicates blinking amber where the condition indicates that the system
is experiencing a fault. Check the System Event Log or the LCD panel, if available on
the bezel, for specific error message. For more information about error messages, see
the
Dell Event and Error Messages Reference Guide at
www.dell.com/
openmanagemanuals .
Table 38 System health and system ID indicator codes
System health and system ID
indicator code Condition
Solid blue Indicates that the system is turned on, system is
healthy, and system ID mode is not active. Press
the system health and system ID button to
switch to system ID mode.
Blinking blue Indicates that the system ID mode is active.
Press the system health and system ID button
to switch to system health mode.
Solid amber Indicates that the system is in fail-safe mode. If
the problem persists, see the Getting help
section.
Blinking amber Indicates that the system is experiencing a fault.
Check the System Event Log or the LCD panel,
if available on the bezel, for specific error
messages. For more information about error
messages, see the
Dell Event and Error
System diagnostics and indicator codes
System health and system ID indicator codes 205