LCD panel
The LCD panel provides system information, status, and error messages to indicate
whether the system is functioning correctly or requires attention. The LCD panel can
also be used to configure or view the system’s iDRAC IP address.
Note
For information about the event and error messages generated by the system
firmware and agents that monitor system components, see the Error Code Lookup
page, at
The LCD panel is available only on the optional front bezel. The optional front bezel is
hot pluggable.
The statuses and conditions of the LCD panel are outlined here:
l
The LCD backlight is white during normal operating conditions.
l
When the system needs attention, the LCD backlight turns amber, and displays an
error code followed by descriptive text.
Note
If the system is connected to a power source and an error is detected, the LCD
turns amber regardless of whether the system is turned on or off.
l
When the system turns off and there are no errors, LCD enters the standby mode
after five minutes of inactivity. Press any button on the LCD to turn it on.
l
If the LCD panel stops responding, remove the bezel and reinstall it.
If the problem persists, see "Getting help" at the end of this publication.
l
The LCD backlight remains off if LCD messaging is turned off using the iDRAC
utility, the LCD panel, or other tools.
Figure 5 LCD panel features
Table 1 LCD panel features
Item Button or
display
Description
1
Left
Moves the cursor back in one-step increments.
2
Select
Selects the menu item highlighted by the cursor.
3
Right
Moves the cursor forward in one-step increments.
During message scrolling:
l
Press and hold the right button to increase scrolling speed.
l
Release the button to stop.
System overview
LCD panel
19
