Dell EMC VxFlex Ready Node R840, Manual

Page: 124 / 218

Ch
ec
k
Lis
t Task Topic
Perform mandatory software tasks to prepare the node for part replacement:
☐
1
Gather the server
information required
for performing the
NDC replacement. See "Network card replacement procedural checklist" in the
VxFlex Ready Node Field Replacement Unit Software Guide
.
Perform the relevant tasks, starting with "Gathering server
information," until you are directed back to this guide for the
actual hardware replacement.
☐
2
Verify the NIC to
replace.
☐
3
Gracefully shut down
the node.
Return to this guide for instructions on replacing the system component:
☐
4
Remove the bezel. See Remove the front bezel on page 166.
☐
5
Disconnect the power
cords and I/O cables. See Disconnect the power cords and I/O cables on page 164.
☐
6
Extend the system
from the cabinet. See Extend the system from the cabinet on page 164.
☐
7
Remove the system
cover. See Remove the system cover on page 173.
☐
8
Install the optional NIC
into expansion card
riser 1. See Install the network interface card into expansion card riser 1
on page 125.
☐
9
Install the system
cover. See Install the system cover on page 173.
☐
10
Slide the system into
the cabinet. See Slide the system into the cabinet on page 165.
☐
11
Connect the I/O
cables and power
cords. See Connect the I/O cables and power cords on page 164.
☐
12
Install the bezel. See Install the front bezel on page 166.
Perform mandatory software tasks to return the node to operation:
☐
13
Verify the NIC in
system setup. See "Network card replacement procedural checklist" in the
VxFlex Ready Node Field Replacement Unit Software Guide
.
Perform the relevant tasks, starting with "" until you are
directed back to this guide for Verify the NIC in System Setup
(BIOS)."
☐
14
Verify the new
network card in the
server.
☐
15
Return the node to
operation.
Hardware FRU procedures
124 VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual