Dell Dimension PY349 Owner'S Manual Download Page 90

Page: 90 / 158

Removing and Installing Parts

Check all cables to be certain that they are properly connected and firmly seated.

Replace the computer cover (see "Replacing the Computer Cover" on page 105).

NOTICE:

To connect a network cable, first plug the cable into the network port or device and then plug it into the

computer.

Connect your computer and devices to electrical outlets, and then turn them on.

See the documentation that came with the drive for instructions on installing any software required for
drive operation.

Check the System Setup for drive configuration changes (see "Entering System Setup" on page 111).

serial ATA data cable

power cable

book.book Page 90 Monday, July 23, 2007 3:47 PM

Summary of Contents for Dimension PY349































































































































































Search results

Summary of Contents for Dimension PY349

Reviews:

Related manuals for Dimension PY349

Brands by name

Popular brands

Dell Dimension PY349, Owner'S Manual

Search results

Summary of Contents for Dimension PY349

Reviews:

Related manuals for Dimension PY349

Brands by name

Popular brands