Appendix
115
Auto Power On
(
Off
default)
Sets the computer to automatically turn on.
•
Off
— disables the Auto Power On feature
•
Everyday
— turns the computer on every day at the time set in
Auto Power
Time
•
Weekdays
— turns the computer on every day from Monday through Friday
at the time set in
Auto Power Time
NOTE:
This feature does not work if you turn off your computer using a power
strip or surge protector.
Auto Power Time
Sets time to automatically turn on the computer.
Time is kept in the standard 12-hour format (
hours:minutes
). Change the
startup time by pressing the right- or left-arrow key to increase or decrease the
numbers, or type numbers in both the date and time fields.
Low Power Mode
(
Off
default)
When
Low Power Mode
is selected, remote wakeup events will no longer
power up the computer from
Hibernate
or
Off
via the onboard network
controller.
Cool and Quiet
(
On
default)
This option enables or disables the Cool ’n’ Quiet technology for all supported
processors
Suspend Mode
(
S3
default)
Sets the computer’s suspend mode.
•
S1 —
sets the computer to a suspend state where the computer is running in
a low-power mode
•
S3 —
sets the computer to a standby state where the power is reduced or
turned off for most components; however, system memory remains active for
both settings
Maintenance
Service Tag
Displays the service tag for your computer.
Load Defaults
Restores system setup options to their factory defaults.
Event Log
Allows you to view the
Event Log
. Entries are marked
R
for
Read
and
U
for
Unread
.
Mark All Entries Read
puts an
R
to the left of all entries.
Clear Log
clears the
Event Log
.
POST Behavior
Fastboot
(
On
default)
When enabled, this feature reduces computer startup time by bypassing some
compatibility steps.
•
Off
— does not skip any steps during computer startup
•
On
— starts the system more quickly
book.book Page 115 Monday, July 23, 2007 3:47 PM
Summary of Contents for Dimension PY349
Page 8: ...8 Contents book book Page 8 Monday July 23 2007 3 47 PM ...
Page 32: ...32 Setting Up and Using Your Computer book book Page 32 Monday July 23 2007 3 47 PM ...
Page 60: ...60 Troubleshooting Tools book book Page 60 Monday July 23 2007 3 47 PM ...
Page 106: ...106 Removing and Installing Parts book book Page 106 Monday July 23 2007 3 47 PM ...