Dell Dimension PY349 Owner'S Manual Download Page 101

Page: 101 / 158

Removing and Installing Parts

101

Slide the drive latch release toward the bottom of the computer and, without releasing the drive latch
release, slide the CD/DVD drive out through the front of the computer.

If you are not replacing the drive, replace the drive panel insert (see "Replacing the Drive-Panel Insert"
on page 83).

Replace the drive panel (see "Replacing the Drive Panel" on page 84).

Replace the computer cover (see "Replacing the Computer Cover" on page 105).

Connect your computer and devices to electrical outlets, and then turn them on.

Configure the drives in System Setup (see "Entering System Setup" on page 111).

drive release latch

sliding plate

CD/DVD drive

book.book Page 101 Monday, July 23, 2007 3:47 PM

Summary of Contents for Dimension PY349































































































































































Search results

Summary of Contents for Dimension PY349

Reviews:

Related manuals for Dimension PY349

Brands by name

Popular brands

Dell Dimension PY349, Owner'S Manual

Search results

Summary of Contents for Dimension PY349

Reviews:

Related manuals for Dimension PY349

Brands by name

Popular brands