Dell Dimension PY349 Owner'S Manual Download Page 24

Page: 24 / 158

Setting Up and Using Your Computer

Connecting One Monitor With a VGA Connector and One Monitor With a DVI Connector

Follow the procedures in "Before You Begin" on page 61.

Connect the VGA connector on the monitor to the VGA (blue) connector on the back of the computer.

Connect the DVI connector on the other monitor to the DVI (white) connector on the back of the
computer.

Connecting a TV

NOTE:

You must purchase an S-video cable, available at most consumer electronics stores, to connect a TV to

your computer. It is not included with your computer.

Follow the procedures in "Before You Begin" on page 61.

Connect one end of the S-video cable to the optional TV-OUT connector on the back of the computer.

Connect the other end of the S-video cable to the S-video input connector on your TV.

Connect the VGA or DVI monitor.

optional DVI adapter

DVI (white) connector

TV-OUT connector

VGA (blue) connector

*May not be present on your computer

book.book Page 24 Monday, July 23, 2007 3:47 PM

Summary of Contents for Dimension PY349































































































































































Search results

Summary of Contents for Dimension PY349

Reviews:

Related manuals for Dimension PY349

Brands by name

Popular brands

Dell Dimension PY349, Owner'S Manual

Search results

Summary of Contents for Dimension PY349

Reviews:

Related manuals for Dimension PY349

Brands by name

Popular brands