Removing and Installing Parts
93
3
Disconnect the power and data cables from the back of the floppy drive.
NOTE:
If you have installed a PCI Express x16 card, this card may cover the floppy-drive connectors. Remove this
card before disconnecting the floppy-drive cables
(see "Removing a PCI Express Card
" on page 80
)
4
Slide the drive latch release toward the bottom of the computer and, without releasing the drive latch
release, slide the floppy drive out through the front of the computer.
5
If you are not replacing the drive, reinstall the drive panel insert (see "Replacing the Drive-Panel Insert"
on page 83).
6
Replace the computer cover (see "Replacing the Computer Cover" on page 105).
7
Connect your computer and devices to electrical outlets, and then turn them on.
8
Check the System Step for the appropriate diskette Drive Option changes
(see "Entering System Setup
" on
page 111
).
1
drive latch release
2
sliding plate
3
floppy drive
3
2
1
book.book Page 93 Monday, July 23, 2007 3:47 PM
Summary of Contents for Dimension PY349
Page 8: ...8 Contents book book Page 8 Monday July 23 2007 3 47 PM ...
Page 32: ...32 Setting Up and Using Your Computer book book Page 32 Monday July 23 2007 3 47 PM ...
Page 60: ...60 Troubleshooting Tools book book Page 60 Monday July 23 2007 3 47 PM ...
Page 106: ...106 Removing and Installing Parts book book Page 106 Monday July 23 2007 3 47 PM ...