Dell Dimension PY349 Owner'S Manual Download Page 103

Page: 103 / 158

Removing and Installing Parts

103

Check all cable connections, and fold cables out of the way to avoid blocking airflow between the fan
and cooling vents.

Replace the drive panel (see "Replacing the Drive Panel" on page 84).

Replace the computer cover (see "Replacing the Computer Cover" on page 105).

NOTICE:

To connect a network cable, first plug the cable into the network device and then plug it into the

computer.

Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for
drive operation.

Enter system setup (see "System Setup" on page 111) and select the appropriate

Drive

option.

Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 52).

power cable

data cable

book.book Page 103 Monday, July 23, 2007 3:47 PM

Summary of Contents for Dimension PY349































































































































































Search results

Summary of Contents for Dimension PY349

Reviews:

Related manuals for Dimension PY349

Brands by name

Popular brands

Dell Dimension PY349, Owner'S Manual

Search results

Summary of Contents for Dimension PY349

Reviews:

Related manuals for Dimension PY349

Brands by name

Popular brands