Dell D28M Service Manual Download Page 80 | Manualshive

Page: 80 / 94

background image

Figure 1. DOS BIOS Update Screen

Updating the Dell BIOS in Linux and Ubuntu environments

If you want to update the system BIOS in a Linux environment such as Ubuntu, see

https://www.dell.com/support/article/sln171755/

.

Flashing the BIOS from the F12 One-Time boot menu

Updating your system BIOS using a BIOS update .exe file copied to a FAT32 USB key and booting from the F12 one time boot menu.

About this task

BIOS Update

You can run the BIOS update file from Windows using a bootable USB key or you can also update the BIOS from the F12 One-Time boot
menu on the system.

Most Dell systems built after 2012 have this capability and you can confirm by booting your system to the F12 One-Time Boot Menu to see
if BIOS FLASH UPDATE is listed as a boot option for your system. If the option is listed, then the BIOS supports this BIOS update option.

NOTE:

Only systems with BIOS Flash Update option in the F12 One-Time Boot Menu can use this function.

Updating from the One-Time Boot Menu

To update your BIOS from the F12 One-Time boot menu, you will need:

•

USB key formatted to the FAT32 file system (key does not have to be bootable)

•

BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB key

•

AC power adapter connected to the system

•

Functional system battery to flash the BIOS

Perform the following steps to execute the BIOS update flash process from the F12 menu:

CAUTION:

Do not power off the system during the BIOS update process. Powering off the system could make the

system fail to boot.

Steps

1. From a power off state, insert the USB key where you copied the flash into a USB port of the system .
2. Power on the system and press the F12 key to access the One-Time Boot Menu, Highlight

BIOS Flash Update

using the arrow keys

then press

Enter

.

80

System setup

«
...
78
79
80
81
82
...
»

Summary of Contents for D28M































































































Reviews:

No comments

Related manuals for D28M

Brand: IBM Pages: 27

EPC-C301 Series

Brand: Advantech Pages: 80

Presario SR5700 - Desktop PC

Brand: Compaq Pages: 76

Brand: Matrox Pages: 174

Brand: C&T Solution Pages: 118

Brand: IBM Pages: 72

VAIO VGC-RB10MV

Brand: Sony Pages: 1

Vaio VGC-LV190Y

Brand: Sony Pages: 2

Vaio VGC-LV150J

Brand: Sony Pages: 2

Vaio VGC-LV110N

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands