Dell D28M, Service Manual

Page: 34 / 94

Installing the 2230 solid-state drive/Intel Optane memory
module
Prerequisites
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the solid-state drive/Intel Optane memory and provides a visual representation of the
installation procedure.
Steps
1. Locate the notch on the 2230 solid-state drive/Intel Optane memory.
2. Align the notch on the 2230 solid-state drive/Intel Optane memory with the tab on the M.2 card slot.
3. Slide the 2230 solid-state drive/Intel Optane memory into the M.2 card slot on the system board.
4. Replace the screw (M2x3) that secures the 2230 solid-state drive/Intel Optane memory to the system board.
Next steps
1. Install the left-side cover .
2. Follow the procedure in After working inside your computer .
NOTE: Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about
enabling the Intel Optane memory, see Enabling Intel Optane memory .
34 Disassembly and reassembly