manualshive.com logo in svg

Dell D28M, Service Manual, Page: 5 / 94

Share
Download
Dell D28M Service Manual Download Page 5

Intel Software Guard Extensions options................................................................................................................... 73
Performance...................................................................................................................................................................73
Power management...................................................................................................................................................... 74
Post behavior................................................................................................................................................................. 74
Manageability................................................................................................................................................................. 75
Virtualization support.................................................................................................................................................... 75
Wireless options............................................................................................................................................................. 76
Maintenance...................................................................................................................................................................76
System logs.................................................................................................................................................................... 76
Advanced configuration................................................................................................................................................ 76

System and setup password.............................................................................................................................................. 77

Assigning a system setup password............................................................................................................................77
Deleting or changing an existing system setup password........................................................................................ 77
Clearing CMOS settings............................................................................................................................................... 78
Clearing BIOS (System Setup) and System passwords........................................................................................... 78

Updating the BIOS in Windows ........................................................................................................................................ 78

Updating BIOS on systems with BitLocker enabled..................................................................................................79
Updating your system BIOS using a USB flash drive................................................................................................ 79
Updating the Dell BIOS in Linux and Ubuntu environments.................................................................................... 80
Flashing the BIOS from the F12 One-Time boot menu............................................................................................ 80

4 Troubleshooting......................................................................................................................... 86

Enhanced Pre-Boot System Assessment (ePSA) diagnostics......................................................................................86

Running the ePSA diagnostics.....................................................................................................................................86

Diagnostics........................................................................................................................................................................... 86
Diagnostic error messages................................................................................................................................................. 88
System error messages.......................................................................................................................................................91
Recovering the operating system...................................................................................................................................... 91
Enabling Intel Optane memory...........................................................................................................................................92
Disabling Intel Optane memory..........................................................................................................................................92
Flea power release...............................................................................................................................................................92
WiFi power cycle................................................................................................................................................................. 93

5 Getting help...............................................................................................................................94

Contacting Dell.................................................................................................................................................................... 94

Contents

5

Summary of Contents for D28M































































































Reviews:

No comments