manualshive.com logo in svg

Dell D28M, Service Manual, Page: 73 / 94

Share
Download
Dell D28M Service Manual Download Page 73

Intel Software Guard Extensions options

Table 8. Intel Software Guard Extensions

Option

Description

Intel SGX Enable

This field specifies you to provide a secured environment for 
running code/storing sensitive information in the context of the 
main OS.

The options are:

•

Disabled

•

Enabled

•

Software controlled—enabled by default

Enclave Memory Size

This option sets 

SGX Enclave Reserve Memory

 size.

The options are:

•

32 MB

•

64 MB

•

128 MB—enabled by default

Performance

Table 9. Performance

Option

Description

Multi Core Support

This field specifies whether the process has one or all cores 
enabled. The performance of some applications improves with the 
additional cores.

•

All

—Default

•

1

•

2

•

3

Intel SpeedStep

Allows you to enable or disable the Intel SpeedStep mode of 
processor.

•

Enable Intel SpeedStep

This option is set by default.

C-States Control

Allows you to enable or disable the additional processor sleep 
states.

•

C states

This option is set by default.

Intel TurboBoost

Allows you to enable or disable the Intel TurboBoost mode of the 
processor.

•

Enable Intel TurboBoost

This option is set by default.

Hyper-Thread Control

Allows you to enable or disable the HyperThreading in the 
processor.

•

Disabled

•

Enabled

—Default

System setup

73

Summary of Contents for D28M































































































Reviews:

No comments