Dell D28M Service Manual Download Page 67 | Manualshive

Page: 67 / 94

Dell D28M Service Manual Download Page 67

System setup

CAUTION:

Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain

changes can make your computer work incorrectly.

NOTE:

Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen

information for future reference.

Use the BIOS Setup program for the following purposes:

•

Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.

•

Change the system configuration information.

•

Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base devices.

Topics:

•

Entering BIOS setup program

•

•

Navigation keys

•

•

System setup options

•

System and setup password

•

Updating the BIOS in Windows

Entering BIOS setup program

About this task

Turn on (or restart) your computer and press F2 immediately.

Boot menu

Press <F12> when the Dell logo appears to initiate a one-time boot menu with a list of the valid boot devices for the system. Diagnostics
and BIOS Setup options are also included in this menu. The devices listed on the boot menu depend on the bootable devices in the system.
This menu is useful when you are attempting to boot to a particular device or to bring up the diagnostics for the system. Using the boot
menu does not make any changes to the boot order stored in the BIOS.

The options are:

•

UEFI Boot

:

•

Windows Boot Manager

•

Other Options

:

•

BIOS Setup

•

Device Configuration

•

BIOS Flash Update

•

Diagnostics

•

SupportAssist OS Recovery

•

Exit Boot Menu and Continue

Navigation keys

NOTE:

For most of the System Setup options, changes that you make are recorded but do not take effect until you

restart the system.

3

System setup

67

«
...
65
66
67
68
69
...
»

Summary of Contents for D28M































































































Reviews:

No comments