Dell C3765dnf Color Laser User Manual Download Page 77

Page: 77 / 578

Connecting Your Printer

Turning on the Printer

WARNING:

Do not use extension cords or power strips.

WARNING:

The printer should not be connected to an Uninterruptible Power Supply (UPS) system.

Connect the power cable to the power connector on the rear of the printer, and then to a power source.

Turn on the printer. When the printer is connected via a USB (Uninterruptible Power Supply) cable, the USB

driver is automatically installed.

Setting Initial Settings on the Operator Panel

You need to set the printer language, country, clock date, time, and fax settings when you turn on printer for the first

time.
When you turn the printer on, the wizard screen to perform the initial setup appears on the touch panel. Follow the

steps below to set the initial settings.

NOTE:

If you do not start configuring the initial settings, the printer automatically restarts in three minutes, and the Main Home

screen appears on the touch panel. After that, you can set the following initial setup by enabling

Power on Wizard

on the

touch panel or Dell Printer Configuration Web Tool if needed.

For more information on operator panel, see "Operator Panel."
For more information on

Dell Printer Configuration Web Tool

, see "Dell™ Printer Configuration Web Tool."

The

Select Your Language

screen appears.

Select

until desired language appears, and then select the desired language.

English
Français
Italiano
Deutsch
Español
Dansk
Nederlands

Summary of Contents for C3765dnf Color Laser



































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C3765dnf Color Laser

Reviews:

Brands by name

Popular brands

Dell C3765dnf Color Laser, User Manual

Search results

Summary of Contents for C3765dnf Color Laser

Reviews:

Brands by name

Popular brands