Dell C3765dnf Color Laser User Manual Download Page 320

Page: 320 / 578

318

Printing

Using the Stored Print Feature

When you send a job to the printer, you can specify in the printer driver to store the job in the memory or hard disk.

When you are ready to print the job, go to the printer and use the operator panel to identify which job in the

memory or hard disk you want to print.

NOTE:

The data in the memory is cleared when the printer is turned off. The data on the optional hard disk is not cleared even

when the printer is turned off.

NOTE:

Stored Print feature is available when:

•

The RAM disk is enabled in the printer menu.

•

RAM Disk is set to Available in the printer driver.

•

The optional hard disk is installed.

•

Hard Disk is set to Available in the printer driver.

Flip on Long Edge

Assumes binding along the long edge of the page (left edge for portrait orientation and top edge

for landscape orientation). The following illustration shows long-edge binding for portrait and

landscape pages:

Flip on Short Edge

Assumes binding along the short edge of the page (top edge for portrait orientation and left

edge for landscape orientation). The following illustration shows short-edge binding for portrait

and landscape pages:

Portrait

Landscape

Portrait

Landscape

Summary of Contents for C3765dnf Color Laser



































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C3765dnf Color Laser

Reviews:

Brands by name

Popular brands

Dell C3765dnf Color Laser, User Manual

Search results

Summary of Contents for C3765dnf Color Laser

Reviews:

Brands by name

Popular brands