Dell C3765dnf Color Laser User Manual Download Page 176

Page: 176 / 578

174

Dell™ Printer Configuration Web Tool

E-Mail Alert Setup Page

Purpose:

To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/Post Office Protocol) used for the Scan

to E-mail feature, forwarding fax to e-mail feature, and E-Mail Alert feature. In this page, you can only verify the

settings of items. If you want to change the settings, go to the pages in the

Print Server Settings

tab.

Values:

SSL/TLS

HTTP - SSL/TLS

Communication

Displays the status of the HTTP - SSL/TLS Communication.

HTTP - SSL/TLS

Communication Port

Number

Displays HTTP - SSL/TLS Communication Port Number.

LDAP - SSL/TLS

Communication

Displays the status of the LDAP - SSL/TLS Communication.

Verify Remote Server

Certificate

Displays the status of the Verify Remote Server Certificate.

IPsec Settings

Protocol

Displays the protocol status.

IKE

Displays IKE authentication.

802.1x

Enable IEEE 802.1x

Displays the status of IEEE 802.1x.

Authentication Method

Displays the setting of authentication method for IEEE 802.1x.

IP Filter (IPv4)

Access List

Displays the list of IP addresses that are permitted or denied access to the

printer.

SMTP Domain

Filtering

Domain Filtering

Displays whether to enable Domain Filtering.

Allow Domain List

Displays the domains allowed for sending e-mails.

This item is available only when the printer is connected using an Ethernet cable.

This item is available only when the printer is connected using the wireless network.

This item is displayed when IPv4 Mode or Dual Stack in IP Mode is selected.

This item is displayed when IPv6 Mode or Dual Stack in IP Mode is selected.

This item is displayed only when Use Manual Address is set to Enable.

This item is displayed only when an IP address has been assigned.

This item is available only when using IPv6 dual mode.

This item is displayed only when the optional hard disk is installed and is set to On for encryption.

This item is available only for LPD or Port9100.

E-Mail Server Settings

Port Status

Displays the port status.

Primary SMTP Gateway

Displays the primary SMTP (Simple Mail Transfer Protocol) gateway.

SMTP Port Number

Displays the SMTP port number.

E-Mail Send

Authentication

Displays the authentication method for outgoing e-mail.

POP3 Server Address

Displays the POP3 (Post Office Protocol 3) server address.

POP3 Port Number

Displays the POP3 port number.

Reply Address

Displays the IP address of servers connected with SMTP protocol when data

is incoming.

SMTP Server

Connection

Displays the status of the SMTP server connection.

Summary of Contents for C3765dnf Color Laser



































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C3765dnf Color Laser

Reviews:

Brands by name

Popular brands

Dell C3765dnf Color Laser, User Manual

Search results

Summary of Contents for C3765dnf Color Laser

Reviews:

Brands by name

Popular brands