Dell C3765dnf Color Laser User Manual Download Page 380

Page: 380 / 578

378

Faxing

To fax a document from the document glass:

Open the document cover.

Place the document facing down on the document glass and align it with the registration guide on the top left

corner of the glass.

Adjust the document resolution. (For details, see "Adjusting the Document Resolution.")

Close the document cover.

NOTE:

Ensure that no document is in the DADF. If any document is detected in the DADF, it takes priority over the

document on the document glass.

NOTE:

If you are faxing a page from a book or magazine, lift the cover until its hinges are caught by the stopper and then

close the cover. If the book or magazine is thicker than 30 mm, start faxing with the cover open.

Adjusting the Document Resolution

You can improve the quality of the fax document by adjusting the resolution, especially for documents with low

image quality or documents containing photographic images.

Press the

(Home)

button.

Select

Fax

Summary of Contents for C3765dnf Color Laser



































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C3765dnf Color Laser

Reviews:

Brands by name

Popular brands

Dell C3765dnf Color Laser, User Manual

Search results

Summary of Contents for C3765dnf Color Laser

Reviews:

Brands by name

Popular brands