manualshive.com logo in svg

Dell C3765dnf Color Laser, User Manual

Share
Download
Dell C3765dnf Color Laser User Manual Download Page 309

Loading Print Media

307

18

Loading Print Media

Loading print media properly helps prevent jams and ensures trouble-free printing.
Before loading any print media, identify the recommended print side of the print media. This information is usually 

indicated on the print media package.

Capacity

Tray1 and the optional 550-sheet feeder (tray2) can hold:

• 550 sheets of the standard paper.

The multipurpose feeder (MPF) can hold:

• 150 sheets of the standard paper.

Print Media Dimensions

The maximum dimensions of print media that tray1 and the optional 550-sheet feeder can handle are:

• Width — 148 mm (5.83 inches) to 215.9 mm (8.5 inches)
• Length — 210 mm (8.27 inches) to 355.6 mm (14.00 inches)

The maximum dimensions of print media that the MPF can handle are:

• Width — 76.2 mm (3.00 inches) to 215.9 mm (8.5 inches)
• Length — 127 mm (5.00 inches) to 355.6 mm (14.00 inches)

Loading Print Media in Tray1 and the Optional 550-Sheet Feeder

This section describes how to load letterhead. For details about loading print media other than letterhead, see 

"Loading Paper." 

 

NOTE: 

To avoid paper jams, do not remove the tray while printing is in progress.

 

NOTE: 

Use only laser print media. Do not use ink jet paper in the printer.

Loading Letterhead (Pre-Printed and Pre-Punched Paper)

The pre-printed paper such as letterhead and pre-punched paper must be inserted bottom edge first with the print 

side facing down as shown below.

 

NOTE: 

Set 

Letterhead 2-Sided

 or 

Letterhead Duplex Mode

 to 

Enable

 and 

Paper Type

 to 

Letterhead

, 

Preprinted

, or 

Prepunched

 from the operator panel or the printer driver even when you print on a single 

side of letterhead, pre-printed, or pre-punched paper.

Summary of Contents for C3765dnf Color Laser



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands