manualshive.com logo in svg

Dell C3765dnf Color Laser, User Manual

Share
Download
Dell C3765dnf Color Laser User Manual Download Page 241

Understanding the Printer Menus

239

Values:

Draft Mode

Purpose:

To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.

Values:

LineTermination

Purpose:

To add the line termination commands.

Values:

Default Color

Purpose:

To specify the color mode to 

Color

 or 

Black

. This setting is used for a print job that does not specify a print mode.

Values:

Ignore Form Feed

Purpose:

To specify whether to ignore blank pages that only contain Form Feed control codes.

Values:

Disable

*

Disables the Hex Dump feature.

Enable

Enables the Hex Dump feature.

Disable

*

Does not print in the draft mode.

Enable

Prints in the draft mode.

Off

*

The line termination command is not added.
CR=CR, LF=LF, FF=FF

Add-LF

The LF command is added.
CR=CR-LF, LF=LF, FF=FF

Add-CR

The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF

CR-XX

The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF

Black

*

Prints in the black and white mode.

Color

Prints in the color mode.

Off

*

Disables the Ignore Form Feed feature.

On

Enables the Ignore Form Feed feature.

Summary of Contents for C3765dnf Color Laser



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands