Dell C3765dnf Color Laser, User Manual

Page: 335 / 578

Copying
333
NOTE:
Tray2
is only available when the optional 550-sheet feeder is installed.
NOTE:
When
Any
is displayed as the paper size and type in the MPF, you can select the paper size and type from this
menu. For details, see "Select Tray."
Darken / Lighten
To adjust the contrast to make the copy darker or lighter than the original:
1
Select
Darken / Lighten
.
2 Select the desired level on the
Darken / Lighten
bar, and then select
OK
.
You can select a contrast level from seven levels between
Darken
and
Lighten
.
Selecting a cell on the left side of the bar makes the document contrast darker, and selecting a cell on the right side
of the bar makes the document contrast lighter.
* Denotes the factory default setting.
2 Sided Copying
To make duplex copies with the specified binding position:
1 Select
2 Sided Copying
.
2 Select the desired setting, and then select
OK
.
* Denotes the factory default setting.
When you are using the document glass and it is set to
1
→
2 Sided
or
2
→
2 Sided
, the display prompts you
for another page after pressing the (Start) button.
a
If you want to place a new document, replace the document with a new document, and then select
Continue
or press the (Start) button.
b
If you finish copying, select
Print Now
.
NOTE:
When you use the DADF to copy both sides of a document, the printed position of the front and back of the document
may differ if the size in the document size setting and the size of the document do not match. In this case, set
Original
Size
to the same size as the document.
3 Works well with light documents or faint pencil markings.
2
1
Normal*
Works well with normal typed or printed documents.
L1 Works well with dark documents.
L2
L3
1
→
1 Sided* Select 1 sided or 2 sided and specify binding position for the 2 sided copy.
1
→
2 Sided
2
→
1 Sided
2
→
2 Sided
Long Edge Biding
Short Edge Binding