Dell Alienware Aurora R4 Owner'S Manual Download Page 71

Page: 71 / 162

Processor Liquid-Cooling Assembly

Processor Liquid-Cooling Assembly

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

Prerequisites

Remove the left side-panel. See "Removing the Left Side-Panel" on

page 25.

Open the PCI shroud. See "Opening the PCI Shroud" on page 45.

Removing the Processor Liquid-Cooling

Assembly

WARNING:

Despite having a plastic shield, the processor liquid-cooling

assembly may be very hot during normal operation. Ensure that it has had
sufficient time to cool before you touch it.

CAUTION:

To ensure maximum cooling for the processor, do not touch the heat

transfer areas on the processor liquid-cooling assembly. The oils in your skin can
reduce the heat transfer capability of the thermal grease.

Press the tab on the CPU pump cable and disconnect the cable from the

top lighting-board.

Disconnect the system fan cable from the top lighting-board.

Loosen the captive screws that secure the processor liquid-cooling

assembly to the system board.

Remove the screws that secure the processor liquid-cooling assembly to

the chassis.

Slide and lift the processor liquid-cooling assembly out of the chassis.

book.book Page 71 Wednesday, May 16, 2012 2:37 PM

Summary of Contents for Alienware Aurora R4



































































































































































Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands

Dell Alienware Aurora R4, Owner'S Manual

Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands