Dell Alienware Aurora R4 Owner'S Manual Download Page 43

Page: 43 / 162

Media-Card Reader

Replacing the Media-Card Reader

Slide the media-card reader into the FlexBay dock.

Replace the screws that secure the media-card reader to the FlexBay dock.

Lift the securing tab and slide the FlexBay dock through the front of the

computer until the securing tab snaps into place.

Connect the FlexBay USB cable to the FLEXBAY connector on the master

I/O board. For more information on the location of the connector, see

"Master I/O Board Components" on page 21.

Close the PCI shroud. See "Closing the PCI Shroud" on page 46.

Replace the left side-panel. See "Replacing the Left Side-Panel" on

page 27.

Lift the drive panel towards the top of your computer until it snaps into

place.

1 media-card reader

2 screws (4)

3 FlexBay dock

book.book Page 43 Wednesday, May 16, 2012 2:37 PM

Summary of Contents for Alienware Aurora R4



































































































































































Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands

Dell Alienware Aurora R4, Owner'S Manual

Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands