Dell Alienware Aurora R4 Owner'S Manual Download Page 133

Page: 133 / 162

Back Bezel

133

Back Bezel

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

Prerequisites

Remove the left side-panel. See "Removing the Left Side-Panel" on

page 25.

Remove the power-supply unit. See "Removing the Power-Supply Unit" on

page 83.

Remove the processor liquid-cooling assembly. See "Removing the

Processor Liquid-Cooling Assembly" on page 71.

Removing the Back Bezel

Remove the screws that secure the security-lock panel to the chassis.

Pull the security-lock panel away from the chassis.

book.book Page 133 Wednesday, May 16, 2012 2:37 PM

Summary of Contents for Alienware Aurora R4



































































































































































Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands

Dell Alienware Aurora R4, Owner'S Manual

Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands