Dell Alienware Aurora R4 Owner'S Manual Download Page 147

Page: 147 / 162

System Setup Utility

147

Memory Technology

Displays the type of memory technology

used.

Memory Speed

Displays the memory speed.

CPU Information

Processor ID

Displays the processor identification

code.

CPU Speed

Displays the processor speed.

Cache L2

Displays the processor L2 cache size.

Cache L3

Displays the processor L3 cache size.

Advanced — Standard CMOS Features

System Date

(mm:dd:yy)

Displays current date.

System Time

(hh:mm:ss)

Displays the current time.

Device Information

SATA Port1

Displays the SATA 1 drive integrated in

the computer.

SATA Port2

Displays the SATA 2 drive integrated in

the computer.

SATA Port3

Displays the SATA 3 drive integrated in

the computer.

SATA Port4

Displays the SATA 4 drive integrated in

the computer.

SATA Port5

Displays the SATA 5 drive integrated in

the computer.

SATA Port6

Displays the SATA 6 drive integrated in

the computer.

Wait for ‘F1’ If Errors

If enabled, the system will HALT during

boot to display system errors.

Advanced — Advanced BIOS Features

Bootup Num-Lock

Select power-on state for num-lock.

book.book Page 147 Wednesday, May 16, 2012 2:37 PM

Summary of Contents for Alienware Aurora R4



































































































































































Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands

Dell Alienware Aurora R4, Owner'S Manual

Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands