Dell Alienware Aurora R4 Owner'S Manual Download Page 75

Page: 75 / 162

Processor

Processor

CAUTION:

Before working inside your computer, read the safety information that

shipped with your computer and follow the steps in "Before You Begin" on page 13.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.

Prerequisites

Remove the left side-panel. See "Removing the Left Side-Panel" on

page 25.

WARNING:

Despite having a plastic shield, the processor liquid-cooling

assembly may be very hot during normal operation. Ensure that it has had
sufficient time to cool before you touch it.

Remove the processor liquid-cooling assembly. See "Removing the

Processor Liquid-Cooling Assembly" on page 71.

Removing the Processor

Press down and push the release lever away from the processor to release it

from the securing tab.

book.book Page 75 Wednesday, May 16, 2012 2:37 PM

Summary of Contents for Alienware Aurora R4



































































































































































Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands

Dell Alienware Aurora R4, Owner'S Manual

Search results

Summary of Contents for Alienware Aurora R4

Reviews:

Related manuals for Alienware Aurora R4

Brands by name

Popular brands