Dell 3333DN Service Manual Download Page 117

Page: 117 / 306

Diagnostic aids

3-13

Wipe Disk

This setting provides you with a tool for erasing the contents of a disk.

Warning:

Wipe Disk removes a disk's data in such a way that it cannot be recovered.

To change this setting:

Touch

Wipe Disk

from the Configuration Menu.

Note:

If an advanced password has been established, you must enter this password in order to change the

setting. If no advanced password exists, you can establish one by using the keyboard that appears on the LCD.

Touch

Wipe disk now

Contents will be lost. Continue?

appears on the LCD.

Touch

Back

to cancel and return to the Configuration Menu.

If you touch

, the device cancels the Wipe Disk process and returns to the Configuration Menu. If you touch

Yes

, the following screen appears:

The panel provides the following progress indicators during the execution of this process:

1/2

indicates that the process is currently in the first stage.

indicates the progress of the current stage of the process.

The progress bar indicates the overall completion of the entire process by filling in throughout each
separate stage.

Wiping Disk

DO NOT

POWER OFF

Summary of Contents for 3333DN



















































































































































































































































































































Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands

Dell 3333DN, Service Manual

Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands