Procedure
1
Within the vSphere client, select the host.
2
Click the
Configuration
tab.
3
Click
Advanced Settings
, select the type shown below for each setting.
4
Update configuration to enable service with the following parameter updates; Refer to the
Logical
Configuration Survey
for client specific information.
Setting
Value
Disk.UseDeviceReset
0
Net.TcpipHeapSize
32
Net.TcpipHeapMax
512
5
Click
Ok
.
Configuring NTP on VMware vSphere ESXi hosts (VMware
vSphere 6.0)
Use this procedure to configure NTP (Network Time Protocol) on VMware vSphere ESXi hosts.
Before you begin
Ensure you have network access and administrative privileges to the VMware vSphere ESXi hosts
Procedure
1
Within the vSphere client, select the host.
2
Select
Time Configuration
.
3
Click
Properties
>
Check
>
NTP Client Enabled
>
Options
>
Start automatically if ports are
open
>
NTP Settings
. Click
Add
.
4
Update configuration to enable service. Refer to the
LCS (Logical Configuration Survey)
for client
specific information.
5
Check Restart NTP service to apply changes.
6
Click
OK
for all options.
What to do next
Configure DNS on VMware vSphere ESXi hosts
Configuring DNS on VMware ESXi hosts (vSphere 6.0)
(AMP-2 M4) (IPv4)
Complete this task to configure DNS on VMware ESXi hosts.
Managing VMware vSphere ESXi 6.0
|
94
