5548A:
interface Vethernet100 (defines the vethernet interface)
inherit port-profile management (defines the port-profile to apply)
bind interface Ethernet1/1 channel 1 (defines the physical port connected
to the server and the channel of the vNIC)
5548B:
interface Vethernet101 (defines the vethernet interface)
inherit port-profile management (defines the port-profile to apply)
bind interface Ethernet1/1 channel 2 (defines the physical port connected
to the server and the channel of the vNIC)
Managing virtual HBA interfaces on the Cisco UCS VIC 1225
The Cisco UCS VIC1225 is a high-performance, converged network adapter that provides acceleration
for the various new operational modes introduced by server virtualization. It brings superior flexibility,
performance, and bandwidth to the new generation of Cisco UCS C-Series Rack-Mount Servers.
The Cisco UCS VIC 1225 implements the Cisco Virtual Machine Fabric Extender (VM-FEX), which unifies
virtual and physical networking into a single infrastructure. It provides VM visibility from the physical
network and a consistent network operations model for physical and virtual servers. In virtualized
environments, this highly configurable and self-virtualized adapter provides integrated, modular LAN
interfaces on Cisco UCS C-Series Rack-Mount Servers.
Later versions of Cisco CIMC firmware refer to the NIV feature as VNTag.
For more information about Cisco UCS VIC 1225 vHBAs, see the
Cisco UCS C-Series Servers Integrated
Management Controller CLI Configuration Guide, Release 1.4
.
Creating virtual HBAs
The Cisco UCS VIC 1225 provides two vHBAs (fc0 and fc1). If NIV mode is enabled, you can create up to
16 additional vHBAs.
Before you begin
Log on with administrator privileges through SSH to CIMC IP to create a vHBA.
Procedure
1
Server#
scope chassis
2
Server /chassis#
scope adapter
num
3
Server /chassis/adapter#
create host-fc-if
name
4
Server /chassis/adapter/host-fc-if#
commit
49
|
Managing networking resources
