Managing the Cisco Nexus 1000V Series Switch
Managing licenses
For instructions on how install and configure a license for the Cisco Nexus 1000V Switch, refer to the
Cisco Nexus 1000V License Configuration Guide
for your release.
Related information
Cisco Nexus 1000V License Configuration Guide
Adding hosts
For instructions on how to add hosts, refer to the
Cisco Nexus 1000V VEM Software Installation and
Upgrade Guide
for your release.
Related information
Cisco Nexus 1000V VEM Software Installation and Upgrade Guide
Creating a port profile
Management settings should not be changed without Dell EMC approval. This content is for example
purposes only.
Procedure
1
Log on to the Cisco Nexus 1000V VSM.
2
To start the configuration, type:
n1000v#
config t
3
To specify the port profile name, type:
n1000v(config)#
port-profile type vethernet
port-profile-name
4
To designate the interfaces as an access port, type:
n1000v(config-port-prof)#
switchport mode access
5
To grant access, type:
n1000v(config-port-prof)#
switchport access vlan vlan-
id
6
To specify the port group, type:
n1000v(config-port-prof)#
vmware port-group
7
To confirm that the port profile is created, type:
n1000v(config-port-prof)#
show port-
profile name name
You can view the port profile in VMware vCenter by navigating to
Inventory
>
Networking
. The
left side of the window displays the port profile you created.
8
To save the configuration:
n1000v(config)#
copy run start
117
|
Managing the Cisco Nexus 1000V Series Switch
