8
To delete a storage group, select
Hosts
>
Storage Groups
. From the list of storage groups,
select the storage group and click
Delete
.
What to do next
Connect the hosts and the LUNs to the storage group.
Adding a host to a storage group
Use this procedure to connect hosts to a storage group.
Before you begin
Before performing this task, the storage group must exist, and the hosts that you want to connect to
should appear in the list of hosts seen by the storage array.
Procedure
1
Log on to Unisphere and select the storage array on which you want to connect the host.
2
Select
Hosts
>
Storage Groups
.
3
When the
Storage Groups
window appears, select a storage group to which you want to connect
the host and click
Connect Hosts
.
4
From the
Storage Group Properties
window, select the
Hosts
tab.
By default,
Show Hosts: Not connected
is selected. Do not change this setting
unless you want to add a host to more than one storage group.
5
From the list of available hosts, use the arrow key to select the host you want to add to the
Hosts
to be Connected
field, and click
Apply
.
6
When the confirmation messages appear, click
Yes
and
OK
.
7
To verify that the hosts were added, from the
Storage Groups
menu, right-click
Storage Group,
and select
Properties
. Select the
Hosts
tab and look for the hosts you connected to the storage
group.
Related information
Adding a LUN to a storage group
(see page 66)
Adding a LUN to a storage group
Use this procedure to connect a LUN to a storage group.
Before you begin
Verify that the LUNs and storage groups exist.
Managing storage resources
|
66
