7
4. Setting up the device
Setting up the initial value of the analog output,
Out.OF:
The final value is adjusted from the smallest digit to the highest digit with
[
▲
] [
▼
]
and
digit by digit confirmed with
[P]
. A minus sign can only be parameterised on the
highest digit. After the last digit, the device changes back into menu level.
Setting up the final value of the analog output,
Out.En:
The final value is adjusted from the smallest digit to the highest digit with
[
▲
] [
▼
]
and
digit by digit confirmed with
[P]
. A minus sign can only be parameterised on the
highest digit. After the last digit, the device changes back into menu level.
Selection of analog output,
Out.rA:
Three output signals are available: 0-10 VDC, 0-20 mA and 4-20 mA, with this
function, the demanded signal is selected.
Threshold values / Limits,
LI-1:
This value defines the threshold, that activates/deactivates an alarm.
Setting up the display time,
SEC
:
The display time is set with [
▲
] [
▼
]. The display moves up in increments of 0.1 sec up
to 1 sec and in increments of 1.0 sec up to 10.0 sec. Confirm the selection by pressing
the
[P]
button. The display then switches back to the menu level again.
Setting the decimal point,
dot
:
The decimal point on the display can be moved with [
▲
] [
▼
] and confirmed with
[P]
.
The display then switches back to the menu level again.
Parameterisation level
Menu level
then
