49
5. Factory settings
to
Totaliser reset
to
Places after
decimal point
10^0=1
10^6
to
10^0=1
Divisor
seconds
hours
minutes
seconds
Time base
Off
quick saving
permanent
saving
Off
Totaliser state
Default values
Menu items
Parameter
Totaliser (Volume metering)
The following procedure should be used:
• Switch off the power supply
• Press button [
P
]
• Switch on voltage supply and press
[P]-
button until
„- - - - -“
is shown in the display.
5.2. Reset to default values
To return the unit to a
defined basic state
, a reset can be carried out to the default values.
With reset, the default values of the program table are loaded and used for subsequent
operation. This puts the unit back to the state in which it was supplied.
Caution! All application-related data are lost.
