4. Setting up the device
19
Back to menu group level,
rEt
:
With
[P]
the selection is confirmed and the device changes into menu group level
„– SER –“
.
Timeout,
tIout
:
The monitoring of the data transfer is parameterised in seconds up to max. 100
seconds; there is no monitoring with an input of
000
. The timeout is adjusted from the
smallest to the largest digit with the navigation keys [
▲
] [
▼
] and confirmed digit per
digit with
[P]
. After the last digit the device changes back into menu level.
Parameterisation level
Menu level
Menu group level
4.3.5. Analog output parameters for analog output 1
Menu level
Selection reference of analog output,
OutPt:
The analog output signal can refer to different functions, in detail these are the current
measurand, the min-value, the max-value or the totaliser-/sum function. If
HoLd
is
selected, the signal of the analog output will be kept. It can be continued processing
after a deactivation of
Hold
. With
[P]
the selection is confirmed and the device
changes into menu level.
Selection analog output,
Out.rA:
Three output signals are available 0-10 VDC, 0-20 mA and 4-20 mA. Select the
desired signal with this function.
Parameterisation level
Menu level
