4. Setting up the device
27
Totaliser factor,
Facto
:
At this the factor (10
0
…10
6
) respectively the divisor for the internal calculation of the
measuring value is assigned.
Time base,
t.base:
Under this parameter the time base of the measurement can be preset in seconds,
minutes or hours.
Totaliser state,
total:
The totaliser makes measurements on a time base of e.g. l/h possible, at this the
scaled input signal is integrated by a time and steadily (select
Stead
) or temporarily
(select
temp
) safed. If
Off
is selected, the function is deactivated. With
[P]
the selection
is confirmed and the device changes into menu level.
Setting up the decimal point for the totaliser,
tot.dt:
The decimal point of the device can be adjusted with the navigation keys
[
▲
] [
▼
]
.
With
[P]
the selection is confirmed and the device changes into menu level.
Parameterisation level
Menu level
Menu group level
4.3.9. Totaliser (Volume metering)
Menu level
…
