11
4. Setting up the device
Setting up the tare/offset value,
tArA:
The given value is added to the linerarised value. In this way, the characteristic line
can be shifted by the selected amount.
Rescaling the measuring input values,
OFFA:
With this function, you can rescale the input value of
e.g. 3.5 mA
(works setting)
without applying a measuring signal. If sensor calibration has been selected, these
parameters are not available.
Rescaling the measuring input values,
EndA:
With this function, you can rescale the input value of
e.g. 19.5 mA
(works setting)
without applying a measuring signal. If sensor calibration has been selected, these
parameters are not available.
Setting up the physical unit,
UnIt
:
One can choose between the above shown physical units. It will be displayed on the
5th digit of the display.
Setting up the display time,
SEC
:
The display time is set with [
▲
] [
▼
]. The display moves up in increments of 0.1 sec up
to 1 sec and in increments of 1.0 sec up to 10.0 sec. Confirm the selection by pressing
the
[P]
button. The display then switches back to the menu level again.
Setting the decimal point,
dot
:
The decimal point on the display can be moved with [
▲
] [
▼
] and confirmed with
[P]
.
The display then switches back to the menu level again.
Parameterisation level
Menu level
then
