4. Setting up the device
25
Alarms for relay 5,
CoM-5:
The allocation of the alarms to relay 5 happens via this parameter, one alarm or a
group of alarms can be chosen. With
[P]
the selection is confirmed and the device
changes into menu level.
Back to menu group level,
rEt
:
With
[P]
the selection is confirmed and the device changes into menu group
level
„– rel –“
Parameterisation level
Menu level
….
Menu group level
4.3.8. Alarm parameters
Menu level
Dependency alarm1,
ALrM.1:
The dependency of alarm 1 can be related to special functions, in detail these are the
current measuring value, the MIN-value, the MAX-value or the totaliser-/sum-value. Is
Hold
selected, then the alarm is hold and processed just after deactivation of
HOLD
.
EHtEr
causes the dependency either by pressing the
[O]
-key on the front of the
housing or by an external signal via the digital input. With
[P]
the selection is
confirmed and the device changes into menu level.
Parameterisation level
Menu level
