4
3. Function and operation description
3. Function and operation description
Operation
The operation is divided into three different levels.
Menu level
(delivery status)
This level is for the standard settings of the device. Only menu items which are sufficent to
set the device into operation are displayed. To get into the professional level, run through
the menu level and parameterise
“
prof
“ under menu item
RUN
.
Menu group level
(complete function volume)
Suited for complex applications as e.g. linkage of alarms, setpoint treatment, totaliser
function etc. In this level function groups which allow an extended parameterisation of the
standard settings are availabe. To leave the menu group level, run through this level and
parameterise „
uloc
„ under menu item
RUN
.
Parameterisation level
:
Parameters deposited in the menu item can here be parameterised. Functions, that can be
changed or adjusted, are always signalised by a flashing of the display. Settings that are
made in the parameterisation level are confirmed with
[P]
and thus safed. By pressing the
[O]-key
(„zero-key“) it leads to a break-off of the value input and to a change into the menu
level. All adjustments are safed automatically by the device and changes into operating
mode, if no further key operation is done within the next 10 seconds.
Keys for up and down navigation in the menu group level.
Change to menu level.
Change into menu level or break-off in value input.
Parameterisation
level
Adjustment of the value / the setting.
Keys for up and down navigation in the menu level.
Description
Key
Change into operation mode or back into menu level.
To confirm the changes made at the parameterisation level.
Change into operation mode.
Change to parameterisation level and deposited values.
Menu group level
Menu level
Level
