![background image](http://html1.mh-extra.com/html/daum-electronic/fitness-3/fitness-3_user-manual_514134027.webp)
B
F/G
A
F / 2x
G / 2x
H/J
F / G
Miscellaneous
The ergo_bike is not intended for use in damp rooms. Rust could develop, which would damage parts of the device
and impair both the operating functions and the safety features.
The ergo_bike operates on a mains voltage of 230 Volt, 50/60 Hz and has a power consumption of 55 Watt.
The power supply you wish to use must fulfil these requirements!
Install the ergo_bike on a level floor. The manufacturer will not be held responsible for any damage done to the floor.
We thus recommend installing the device on a protective base.
The cable of the handlebars support column must be driven into the column (after plugging
the connector) before inserting the column into the frame. Otherwise, the cable could be
crushed, which could lead to malfunctions of the ergo_bike!
Dashboard
Handlebars column
Handlebars
Dashboard cable
Handlebars column
fastening screws
Ca
refu
lly
ins
ert
the
han
dle
bars
sup
po
rt c
olu
mn
!!!!
Attention !!
Connector
Saddle
with horizontal
adjustment guide
Main device body
with straps
Toggle button
Toggle button 12d
Saddle support
Pedal
(black connector / CS)
Roller caster
Any fault or defect on the device that have an impact on safety must be repaired. Defective or broken parts must be
replaced immediately (see spare parts list page 33). The device is not to be used until the repair is complete.
Tensing button
(immobilising the handlebars)
E
ergo_bike
Assembly and maintenance
Installation hints
25
Summary of Contents for Fitness 3
Page 1: ...3 3 3 User manual ...
Page 37: ......