Remove the perforated plate cover on the
left side, looking to the front direction.
For this pull the plate from below.
Connect the connector of the cable from the dashboard
with the cable from the frame.
Installing the dashboard and the handlebars column
SW 6
C / 2x
D / 2x
SW 8
F / 2x
G / 2x
27
Pull the dashboard cable
through the handlebars column
by means of the wire.
Insert the handlebars column into the front opening of the frame.
Use the recessed head screws (1) and washers to
attach together the frame and the handlebars
column. Since the handlebars column is not yet
attached at this moment, please take care to keep
it upright (straight). Then attach the handlebars
column by alternatively screwing in the two pre-
installed screws (2) until it is immobilised. The
immobilising screw on the right side can be
reached through a hole in the perforated plate
triangle on the right side.
2
1
Install the handlebars on the column and attach it from
the rear by means of two screws and washers.
Summary of Contents for Fitness 3
Page 1: ...3 3 3 User manual ...
Page 37: ......
