42
Wipe Effects
In “
WIPE Effects
,” the user is allowed to select the Wipe style and configure the wipe’s
border softness and width.
Wipe
– Selection of a WIPE effect from a set of 32 WIPE transition effects.
Soft
– A low value results in a solid edge and a high value gives a soft diffused edge.
Width
– A low value results in a thin edge and a high value gives a wide edge.
WIPE Border
In this sub-option, the user will be allowed to fine-tune the border color by adjusting the
Luma
,
Saturation
and
Hue
values.
Note: Enable the WIPE border by setting the border width (Width) to a value greater than
0. The WIPE border is disabled when the border width is set to 0.
Position
Position allows the user to adjust the center position of certain wipes (e.g Circle & Elipse).
X
represents the horizontal position and
Y
is the vertical position.
Horizontal Position (X)
Positive value moves the wipe center to the right.
Negative value moves the wipe center to the left.
Zero value positions the wipe center at the screen center
Vertical Position (Y)
Positive value moves the wipe center up.
Negative value moves the wipe center down.
Zero value positions the wipe center at the screen center.
Matte
The user can open the Matte view by pressing the
BLK/MATTE
button of the
Program
and
Preset
button rows. The color of the Matte is configurable in this sub-option by adjusting
Luma
,
Saturation
and
Hue
.
For
Hue
value,
Red
is 0,
Green
is approximately 120 and
Blue
is approximately 240. For
secondary colors,
Yellow
is approximately 60,
Cyan
is approximately 180 and
Violet
is
approximately 300.
The
Sat
or
Saturation value
refers to the intensity of the color selected in
Hue
. As the
saturation increases, the color appears to be more pure. As the saturation decreases, the
color appears to be more washed-out or pale.
The Luma value
relates to how bright or dark the selected color or hue is. The higher the
Luma
value, the brighter the color selected in
Hue
.
Summary of Contents for HS-3200
